RCA CC643 manual Playback on TV or VCR with AUDIO/VIDEO in Jacks

Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks, you will need an optional audio/video cable such as VH83 shown on page 68. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV.

Back of
Mono VCR or	White
TV Monitor
			Output Cable
	/	_	(Optional)		A'tJDIO	Jack
	Audio	Plug	Audio/Video
	Yellow Video Plug			_
		--OR---			"..
						.°
						.°
Back of	Y-Adapter	White				."	•
Stereo VCR or
TV Monitor	(Optional)	Audio			Audio/Video	.."	"
		Plug			Output Cable	""	""
		tI			(Optional)	'.." "" VIDEO Jack
....	_m---._					.."'"
		Yellow	Video Plug

Installation

°Attach the white plug on one end of the audio/video cable to the AUDIO

IN jack on the TV (or VCR).

Notes: If your cable does not have white and yellow plugs, just be sure to attach the same color to the audio jacks.

If your TV (or VCR) has stereo AUDIO IN jacks, attach the plug to the one labeled

MONO. If one is not labeled MONO, you may need a Y-adapter, such as AH25, shown on page 68 to hear both channels.

2.Attach the yellow plug to the VIDEO IN jack on the TV (or VCR).

3.Attach the white plug on the other end

of the audio/video cable to the AUDIO jack (located under the small cover) on the side of the camcorder.

4.Attach the yellow plug to the yellow VIDEO jack on the camcorder.

62