RCA CC643 manual Using the Battery to Power Your Camcorder, Attach Charged Battery

Using the Battery to Power Your Camcorder

The battery must be charged as described on the nextpage before it can be used the first time. Initial charging will take approximately 70 minutes. When fully charged, the battery should supply about 70 minutes of operating time (depending on how much you use zoom and pause). Conserve battery power by _:urningthe camcorder off during recording breaks.

Note: The small marker switch on top of the battery is for use as a personal reminder to help you remember to recharge the battery. It has no other function.

Reference

Marks

Marker

Switch

BATT. RELEASE Button

POWER Switch

and Indicator

-temu_rials. , _?;_ _,_

Do not attempt toxlisas_nible or modify the battery. There are no

specified adapter/chargers and camcorders._7-_yi_gt_, _._ _,__ Throwing the battery into a fire orexp0shig k to exeessive i_eat - over,149CF (65°,C) _ould b_ .....

hazardous.

		Attach	the Charged Battery
		If the DC cable is attached to the
		camcorder, remove it before attaching the
		battery. Also, install the lithium clock
		cell before attaching the battery pack.
		Details	on page 38.
.- ,-.-._,	,_,:.- ._.>• ,-. _. _,_ .4-,	I. Align the reference mark on the
		, .:/_.,_<_'_:,_7._.

battery with mark on back of camcorder.

bottom of the battery down until it locks into place.

3.Place the POWER switch in CAMERA. The power indicator will light.

Remove the Battery

Slide and hold BATE. RELEASE to the right while removing the battery.

2.Hold the top of the battery flush against the camcorder and press the

Consumer Electronics product indicates that we are participating in a ATTENTION: The RBRC seal on the battery used in your Thomson

program to collect and recycle Nickel Cadmium batterie:_ throughout the United States. Please call 1-800-8-BATTERY for information or

contact your local recycling center.

._.0 ,,,_ _

__

13