Playback on a TV Without Audio/Video Inputs
To connect your camcorder to a TV without audio/video inputs, you will need an optional 1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82 or VH90 shown on page 68. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages
VHF Antenna
Optional Coaxial
RF Cable
(such as VH82 or VH90)
Back of TV
| d |
|
| AUDIO, RF DC |
|
|
|
| |
|
|
|
| OUT, VIDEO Jacks |
| _\ | _ | OUT TO TV Connector | RF Output |
Optional |
| I |
| Adapter's Plug |
| VCR/TV Switch |
| ||
\ | I |
|
Transformer | \ |
|
|
|
|
| |
| IN FROM ANT | _ | € |
| Connector | Switch | Optional RF Output Adapter |
| CH3/CH4 | ||
|
|
| (1CVA147C) |
Installation
°
.
Disconnect | the VHF antenna from |
| Note: | If your TV has 300 ohm screw |
your TV. Connect the antenna to the |
| terminals, you will need a 75/300 ohm | ||
| transformer, such as VH54, shown on | |||
IN FROM ANT connector on the RF |
| |||
| page | 68. | ||
output adapter if you are going to |
| |||
| Attach the RF output adapter's plug to | |||
leave the adapter connected to the TV. | ° | |||
| the AUDIO, RF DC OUT, and VIDEO | |||
Note: If your VHF antenna is the flat |
| |||
| jacks located under the small cover on | |||
| ||||
| the side of the camcorder. | |||
you will also need an optional 300/75 |
| |||
|
|
| ||
ohm transformer. |
|
|
| |
Attach one end of the optional coaxial |
|
|
| |
RF cable to the OUT TO TV |
|
|
| |
connector on the adapter, and attach |
|
|
| |
the other end to the VHF input on |
|
|
| |
your TV | as shown. |
|
|
|
64
