Date/Time Display m Setting the Time and Date
The date and time must be set before it can be displayed and recorded on your tapes. The clock cell must be installed as shown on the previous page before the date can be set and recorded.
1.Make sure the AE dial is not set to AUTO.
2.Press the MENU button. The recording menu will appear in the viewfinder.
3.Press + or- in the center of the AE dial to highlight DATEgTIME.
GAIN UP | MAX |
TELE MACRO | OFF |
INTERVAL TIMER | OFF |
REC TIME | OFF |
JLIP ID NO. | 07 |
SET CHARACTER |
|
DA'nEmM |
|
END :MENU KEY |
|
4.Press • in the center of the AE dial to display the time and date screen.
AE Dial
Button
5.Press • or • to select the item you want to set (month, day, year, hour including AM/PM, and minutes).
6.Press + or - until the correct setting appears. Press + to go forward or- to go back.
7.When you are finished, press • or • to highlight SET.
8.When SET begins to flash, press MENU. The menu reappears. Press MENU again to close the menu.
Notes:
If you enter an invalid date, INPUT ERROR appears in the viewfinder. Press +,
To return to the previous setting while you are setting the time and date, highlight CANCEL and press MENU.
\ I /
JAN 1.00 AM 12:00
SET
CANCEL
39
