Time-Remaining Display
The approximate time remaining on the tape in the camcorder for the tape speed
you have selected is automatically displayed in the viewfinder. Use the
T20o30o40 button to set the correct tape length before the camcorder can
correctly calculate time remaining.
),
,i
T20,30,40 |
|
| |
Button |
|
| |
Button |
|
| |
|
| ,'o, | |
| 30MIN | I |
|
|
| 30MIN | T30 |
| 29MIN | SP | :_' |
| I |
| |
|
|
| |
| 3MIN |
| ;it, _ |
| 1 | TAPE | END |
| 2MIN |
|
|
| (Flashing) |
|
|
| l |
|
|
| 3NIN |
|
|
| (Flashing) |
|
|
| ,L |
|
|
| OMIN |
|
|
| (Flashing) |
| _._ |
Set the Tape Length
1. Use the
tape speed. SP or SLP appears in the viewfinder.
2.Use the T°20°30.40 button to select the length of tape you are using.
•Select T20 if you are using a tape with 20 minutes or less recording time.
•Select T30 if you are using a tape with 30 minutes recording time.
•Select T40 if you are using a tape with 40 minutes recording time.
The
flashing when the remaining tape time reaches two minutes.
TAPE END appears when the tape reaches its end during recording or a cassette is loaded whose tape is already at its end.
;7
• ..
??
,52
