TG5921AL_5922AL.book Page 31 Friday, February 24, 2006 3:42 PM
Programming
Programming using the direct commands
1 {MENU}
2 Enter the desired feature code.
3 Enter the desired setting code.
LThis step may vary depending on the feature being programmed.
4 {Save} i{OFF}
Note:
LIn the following table:
–< > shows the default setting.
–If “System setting” column is checked, you do not need to programme the same item using another handset (KX- TG5922).
LIf you make a mistake or enter the wrong code, press {OFF}, then start again by pressing {MENU}.
Feature | Feature | Setting code | System |
| code |
| setting |
Auto talk*1 | {0}{3} | {1}: On {0}: <Off> | – |
Copy phonebook (1 item)*2 | {#}{1} | (page 24) | – |
Copy phonebook (all items)*2 | {#}{2} | (page 24) | – |
Key tone*3 | {0}{2} | {1}: <On> {0}: Off | – |
LCD contrast | {0}{1} | – | |
(Display contrast) |
|
|
|
Message alert | {0}{#} | {1}: On {0}: <Off> | – |
Registration | {0}{0} | (page 36) | – |
Ring colour | {1}{4} | {1}: <Colour1>=Amber | – |
(Ringer indicator colour) |
| {2}: Colour2=Green |
|
|
| {3}: Colour3=Red |
|
|
| {4}: Multicolour |
|
Ringer tone | {1}{2} | – | |
|
|
| |
Ringer volume | {1}{1} | {1}: Low {2}: Medium | – |
|
| {3}: <High> {0}: Off |
|
Set area code | {0}{4} | (page 27) | – |
Set dial mode | {0}{5}{1} | (page 45) | r |
Set line mode*4 | {0}{5}{3} | {1}: A {2}: <B> | r |
31
