Fujitsu DL3750+/3850+ Carriage return CR Centronics interface Column Command set, Condensed print

GLOSSARY OF TERMS

Carriage return (CR)

Centronics interface

Column

Command set

The return of the print head carriage to the beginning of the next line.

A type of parallel interface. See Parallel interface.

A vertical section on a printed page. This printer can print 80-column pages at 10-pitch (10 characters per inch).

A set of print and format commands used to control the printer. Each printer has its own resident command sets embedded in the printer firmware. These command sets are actuated by codes sent from the host computer.

Condensed print	Print that uses “condensed” characters. Condensed characters are
	narrower than regular characters. Using condensed print increases the
	number of characters per line.
Continuous forms	Connected, fan-folded sheets of paper that are fed into the printer
	using forms tractors. The fan-folded sheets are separated by tearing
	them at their perforations.
Control panel	A panel containing the printer indicators and buttons. The control
	panel is used to control printer operations, such as loading paper,
	selecting print features, and changing setup options.

cpi

cps

Cut sheets

Defaults

Dot matrix

Characters per horizontal inch. Also referred to as pitch. For example, 12-pitch means 12 cpi.

Characters per second.

See Single sheets.

Settings selected automatically by the printer when power is turned on. Enter setup mode to change the defaults to ensure compatibility with your system hardware and software.

The grid used to print characters on a dot matrix printer. Each dot corresponds to a wire in the print head.

GL-2 User's Manual