Fujitsu DL3750+/3850+ manual Paper Handling, Selecting Paper

PAPER HANDLING

PAPER HANDLING		3
This chapter explains how your printer uses paper.
Topics covered are:
•	Selecting paper
• Overview of paper operations
• Adjusting for paper thickness
•	Using single sheets
•	Using continuous forms
• Feeding and positioning paper
•	Switching paper types

Tips for paper handling are given at the end of this chapter. Check that section if you are using multipart forms, envelopes, or labels.

SELECTING PAPER	The printer can handle either single sheets or continuous forms. Single sheets,
	also called cut sheets, include envelopes and noncontinuous, multipart forms.
	Continuous forms include labels and multipart forms fed into the printer using
	the forms tractors.

For best results, use paper that meets the specifications listed below. (See Appendix B for detailed specifications.) If you are unsure of the suitability of a particular paper, try testing the paper or consult your dealer.

Length	80	Single sheets: 76 to 364 mm (3 to 14.3 in)
	column	Continuous forms: 102 mm (4 in) or greater
	136	Single sheets: 76 to 420 mm (3 to 16.5 in)
	column	Continuous forms: 102 mm (4 in) or greater
Width	80	Single sheets: 102 to 267 mm (4 to 10.5 in)
	column	Continuous forms: 102 to 267 mm (4 to 10.5 in)
	136	Single sheets: 102 to 420 mm (4 to 16.5 in)
	column	Continuous forms: 102 to 420 mm (4 to 16.5 in)
Thickness		0.35 mm (0.014 in) maximum total thickness.
Copies		1 to 5 copies, including the original.
		For carbon-interleaved paper, the carbon counts as a
		copy.

Reference	Quick
Introduc-
Setting
Up
Handling	Paper
Printing
Setup
Mode

User's Manual 3-1