Fujitsu DL3750+/3850+ manual Switching to Continuous Forms, Tips on Paper Handling General Tips

PAPER HANDLING

Switching to Continuous Forms

To switch from single sheets to continuous forms:

1.If a sheet of paper is loaded, remove the paper by turning the platen knob or pressing and holding down the LF/FF button.

CAUTION

Failure to remove paper may cause a paper jam.

2.Move the paper select lever to the rear to the continuous forms position.

3.Press the LOAD button. The continuous forms paper advances to the top-of-form position.

You are now ready to print using continuous forms paper.

TIPS ON PAPER HANDLING General Tips

•Use high-quality paper. Do not use paper that is wrinkled or curled at the edges.

•Do not use paper with staples or metal parts.

•Do not use paper with unpredictable variations in thickness, such as paper with partial multilayers, paper with embossed printing, and labels with the backing sheet exposed.

•Store paper in a clean, dry environment.

Multipart Forms

•Avoid using carbon-interleaved single sheets if possible. Printing tends to become misaligned on the bottom sheet.

•To ensure smoother feeding of paper-stapled, multipart forms, raise the cut sheet stand to support the forms.

3-18 User's Manual