Fujitsu DL3750+/3850+ manual Adjust Items and Options

USING SETUP MODE

Table 5.5 ADJUST Items and Options

NOTE: Underlined options are the factory defaults.

ADJUST	Options	Description
Items
<CNT-ORG>		Sets the top-of-form for continuous
		forms in increments of 1/6 inch
		(4.2 mm) from the physical top of
		the page.
	1/6 IN	The default is recommended if
	1.8/6 IN	your top margin is not software-
	:	specified. A setting of 1/6 inch
	6/6 IN	is preferable when your top
	:	margin is software-specified.
	66/6 IN
<CNTFINE>		Fine-tunes the top-of-form position
		for continuous forms.
	0/180, ..., 29/180	Increases top-of-form in increments
		of 1/180 inch
		(0.14 mm).
<CNT-ORG>		Sets the top-of-form for single
		sheets in increments of 1/6 inch
		(4.2 mm) from the physical top of
		the page.
	1/6 IN	The default is recommended if
	1.8/6 IN	your top margin is not software-
	:	specified. A setting of 1/6 inch
	6/6 IN	is preferable when your top
	:	margin is software-specified.
	66/6 IN
<CUTFINE>		Fine-tunes the top-of-form
		position for single sheets.
	0/180, ..., 29/180	Increases top-of-form in increments
		of 1/180 inch (0.14 mm).

5-36 User's Manual