Fujitsu DL3750+/3850+ manual 0BYTE option is recommended, Only for graphics application, Data

USING SETUP MODE

Table 5.4 HARDWRE Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

HARDWRE	Options	Description
Items
<BUFFER>		NOTE:
(continued)		• 0BYTE option is recommended
		only for graphics application.
		• With 128KB selected, the printer
		cannot accept any download font
		data.
<INTRFCE>		Selects the type of the interface to the
		computer.
	PARALEL	Centronics parallel interface
	SERIAL	RS-232C serial interface
	USB	USB interface
	AUTO-2S	Auto interface selection mode
	AUTO-4S	• Both interfaces are ready for
	AUTO-6S	communication.
	AUTO10S	• Specify the timing regarding the
	AUTO15S	selected interface as being inactive.
	AUTO20S	To switch the interface to the optional
		LAN interface, mount the LAN card with
		the setup mode set to "AUTO-XS" or
		"AUTOXXS" under "INTERFCE," which
		in turn is under "HARDWRE" The
		interface will automatically switch to the
		optional LAN interface.
		To switch the interface to something other
		than the optional LAN interface, do either
		of the following:
		• To return the setup mode to
		"INTERFCE" under "HARDWRE,"
		remove the LAN card.
		• To switch the interface to a fixed
		interface, set PARALEL,USB with the

LAN card mounted, and the setup mode set to "INTERFCE" under "HARDWRE."

Serial Interface or USB interface Items. The following <FORMAT> to <DUPLEX> items are not printed when you select the PARALEL option for the <INTRFCE> item. Be sure that the options selected on the printer are the same as the options selected using your computer operating system or your software. Refer to the documentation provided for your computer and software.

Reference	Quick
Introduc-
Setting
Up

Handling Paper

Printing

SetupMode

User's Manual 5-31