Fujitsu DL3750+/3850+ manual Default, List, Self-Tst, Hex-Dump, Almnt

USING SETUP MODE

Table 5.1 Setup Mode Functions (Cont.)

Type	Function	Purpose
Select	DEFAULT	Resets factory defaults in MENU1 and MENU2.
Sub Function	LIST	Prints a list of all currently selected options.
Self Diagnostic	SELF-TST	Runs the self-test.
Function
	HEX-DUMP	Prints hex dumps.
	V-ALMNT	Checks and corrects vertical print alignment.

To select a function from the <<FUNCTION>> menu:

1.Repeatedly press the LOAD button or the LF/FF button to position the red cursor on the plastic print guide under the function you require. The LOAD button moves the cursor to the next option and the LF/FF button moves the cursor to the previous option.

2.Press the TEAR OFF button or the MENU button to select the function. If the function has items and options, the printer prints the first item and its options. The MENU1, MENU2, HARDWRE, ADJUST, and CONFIG functions contain items that have selectable options. The other functions have neither items nor options.

Reference	Quick
Introduc-
Setting
Up
Handling	Paper

The first three MENU1 items and their options are shown below.

Items are enclosed in single brackets < >.

<EMULATE>		DPL24C+	XL24E	ESC/P2
<FONT>
COUR 10	PRSTG12	COMPRSD	BOLDFCE	PICA 10	CORRESP	OCR-B	OCR-A	COUR-N	COUR-B
COUR-I	N.SAN-N	N.SAN-B N.SAN-I		TIMLS-N	TIMLS-B	TIMLS-I	DOWNLD0	DOWNLD1
<QUALITY>		LETTER	REPORT	DRAFT	HI-DRAFT

Printing

SetupMode

User's Manual 5-5