Fujitsu DL3750+/3850+ Removing Printed Pages Clearing the Print Buffer, Removing Single Sheets

PRINTING

REMOVING PRINTED PAGES

CLEARING THE PRINT BUFFER

This section describes the best methods for removing single sheets or continuous forms paper after printing.

Removing Single Sheets

When you print using software, the printer automatically ejects each sheet of paper when the end of the printed page is reached. To eject sheets manually, use one of the following methods:

•Press and hold down the LF/FF button to execute a form feed, or

•Turn the platen knob clockwise.

Removing Continuous Forms

To avoid wasting paper, use the printer tear-off function to remove continuous forms paper. Press the TEAR OFF button to advance the perforation to the tear-off edge. Tear the paper off, and then press any button to retract the paper back to the top-of-form position. See Chapter 3 for more detailed instructions.

Place the printer offline. Press the MENU and TEAR OFF buttons simultane- ously to clear all data from the print buffer. This method is useful when you cancel a print operation and do not want to continue printing data already sent to the printer.

This method does not change or clear MENU1 and MENU2 settings, paper loading position settings, and downloaded fonts.

4-8 User's Manual