Fujitsu DL3750+/3850+ manual Skip-Pr

USING SETUP MODE

Table 5.6 CONFIG Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

CONFIG Items	Options	Description
SKIP-PR		Setting of printing speed change
		processing (skip)
	ENABLE	The skip processing is executed.
		When a certain amount of blank
		spaces are found in a line, it changes
		the printing speed for the blank
		spaces.
	DISABLE	The skip processing is not executed.
		It does not change the printing speed
		for the blank spaces.
		- If the printing speed of the printing
		data varies before and after the
		blank spaces (such as LQ
		characters + blank space + CQ
		characters), it changes printing
		speeds regardless of this setting.
STATUS		Setting of the asynchronous status
		function
	ENABLE	The status information is stored in the
		send buffer by a nibble mode request.
	DISABLE	The status information is not stored in
		the send buffer by a nibble mode
		request.
BANDCTL		Setting of reducing backward line
		feeds as much as possible. Backward
		line feeds occur when printing vertical
		enlargement characters or multi-path
		characters which involve several
		printing paths for a print activation.
	ENABLE	Reduce control is performed.
	DISABLE	Reduce control is not performed.

Reference	Quick
Introduc-
Setting
Up

Handling Paper

Printing

SetupMode

User's Manual 5-45