Fujitsu DL3750+/3850+ manual Deciding Which, Options to Change, Required Options

USING SETUP MODE

DECIDING WHICH	The previous page shows a printout of the printer’s factory default settings. In
OPTIONS TO CHANGE	this printout, options are listed by functional group:
		• Menu 1 settings (MENU1 function)
		• Menu 2 settings (MENU2 function)
		• Hardware settings (HARDWRE function)
		• Print position adjustment settings (ADJUST function)
		• Configuration settings (CONFIG function)
	Most selectable options only alter print features, such as the typestyle,
	page format. However, some options must be selected correctly for the
	printer to work properly with your hardware and software. For each
	function, Table 5.2 lists items whose options must be selected correctly for
	system and printer accessory compatibility.
			Table 5.2 Required Options
		Function	Item	Option
		MENU1	EMULATE	The emulation selected on the printer
				must be the same as the emulation
				selected in your software. If you selected
				an emulation when you set up the
				printer (Chapter 2), you do not need to
				change the EMULATE option unless you
				want to change to a different emulation.
				The emulation assigned to MENU1 is the
				default when you turn the printer on.
				See the section Changing MENU1 and
				MENU2 Options later in this chapter.
		MENU2	None	If you use MENU2, the emulation selected
				for MENU 2 must be the same as the
				emulation selected in your software.
				See the section Changing MENU1 and
				MENU2 Options later in this chapter.

5-12 User's Manual