Fujitsu DL3750+/3850+ manual LED status, Area Over

TROUBLE-SHOOTING

Table 7.3 Operating Problems and Solutions (Cont.)

Error name	Error description		Recovery method
Load jam error	After the tractor PE sensor	-	Execute the loading
	detected the form at		operation.
	continuous form loading,	-	Press the online button
	the TOF sensor does not		to turn the printer
	detect the top of the form		online.
	even after line feed is	- When the cut sheets
	executed a certain number		are loaded, remove the
	of times.		sheets once, and
	After the set sensor detects		then insert them again.
	the sheet at cut sheet		They are then loaded
	loading, the TOF sensor		automatically.
	does not detect he top of
	the sheet even after line
	feed is executed a certain
	number of times.

LEDs light up depending on the following error types.

			LED status
Error name		Blink		Light
	ONLINE		AREA OVER	PAPER OUT
Paper end				*
Eject jam error			*	*
Continuous form/
cut sheet switch	*			*
lever error
Load jam error				*

*1 If the setup item PPR-OUT:IGNORE is specified, paper end is not

detected.

7-8 User's Manual