SETTING UP

 

 

 

2

SETTING UP

Your new printer is easy to install and set up.

This chapter tells you how to set up the printer

and start printing right away. If this is your first

printer, you should read the entire chapter before

 

attempting to use the printer.

 

In this chapter, you will learn how to:

 

Unpack, assemble, and select a good location for the printer

Identify the printer’s major parts

Connect the power cord and the interface cable

Test the printer before connecting it to your computer

Select an emulation and print a sample page using your software

Installing the printer driver

If you have a problem while setting up the printer, review the section Solving

Problems in Chapter 7. If the problem persists, contact your dealer.

 

Reference

Quick

 

Introduction

 

 

 

 

 

 

 

 

SettingUp

 

 

 

 

SELECTING A GOOD

This printer is suitable for most business, office, and home environments. To

LOCATION

obtain peak performance from the printer, select a location that meets the

 

following guidelines:

 

Place the printer on a sturdy, level surface.

 

Place the printer near a well-grounded AC power outlet.

 

Ensure easy access to the front and rear of the printer by leaving

 

several inches of space around the printer. Do not block the air vents

 

on the front, left, and right sides of the printer.

 

Do not place the printer in direct sunlight or near heaters.

 

Make sure that the room is well-ventilated and free from excessive

 

dust.

Handling

Paper

 

 

Printing Setup Mode

User's Manual

2-1

Page 21
Image 21
Fujitsu DL3750+/3850+ manual Setting UP, Selecting a Good, Location