Fujitsu DL3750+/3850+ manual Chr-Set, Italic, Graphic, Prf-Skp, No-Skip, Width, Zerofnt

USING SETUP MODE

Table 5.3 MENU1 and MENU2 Items and Options (Cont.)

NOTES:

•Underlined options are the factory defaults.

•Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table.

MENU1 and	Options	Description
MENU2 Items
<CHR-SET>	SET 1	IBM character set 1
	SET 2	IBM character set 2
		If a downloaded (soft) font is used, the
		character set for that font overrides the
		<CHR-SET> setting.
	(*3)
	ITALIC	Italic characters are available.
	GRAPHIC	Graphics characters (ruled lines) are
		available.
<PRF-SKP>		For continuous forms, this option
		specifies whether an inch is skipped
		around the perforation. If you are not
		using software to specify a bottom
		margin, select SKIP when using thicker,
		multipart forms.
	SKIP	One inch is skipped around the perfora-
		tion.
	NO-SKIP	The perforation is not skipped. Printing
		continues in the bottom margin of the
		page.
<WIDTH>	13.6 IN	13.6-inch page width
(*5)	11.4 IN	11.4-inch page width
	11.0 IN	11-inch page width
	8.0 IN	8-inch page width
<ZEROFNT>		Specifies whether to print the number
(*2)		zero with a slash. This is useful to
		distinguish the capital letter “O”
		from the number “0”.
		Invalid for some soft fonts.
	NO-SLSH	0
	SLASH	0/

5-24 User's Manual