Fujitsu DL3750+/3850+ manual Select the MENU1 function, Select an emulation

SETTING UP

3.Select the MENU1 function.

Locate the red cursor on the plastic print guide. Initially, this cursor should be positioned under SAVE & END at the beginning of the <<FUNCTION>> menu. Press the LOAD button repeatedly to position the red cursor beneath MENU1, as shown below:

<<FUNCTION>>
SAVE&END MENU1 MENU2	H	ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT

Press the LOAD button to position to the red cursor.

Reference	Quick
Introduction
SettingUp

Press the MENU button to select MENU1 and print the following <EMULATE> options:

<EMULATE> DPL24C+ XL24E ESC/P2

The currently selected emulation is indicated by a short underline. In the figure shown above, the Fujitsu DPL24C PLUS emulation is selected.

4.Select an emulation.

Press the LOAD button repeatedly to position the red cursor under the required emulation. Press the MENU button to select the emulation and print the next MENU1 item.

Handling Paper

Printing Setup Mode

User's Manual 2-25