Manuals / Fujitsu / Computer Equipment / Printer

Fujitsu DL3750+/3850+ Printer Operations Normal Mode, Operation Online Offline Required Response

Models: DL3750+/3850+

1 256

Download 256 pages 54.31 Kb

Page 18

QUICK REFERENCE

Printer Operations (Normal Mode)

√: Operation can be performed when the printer is in this state.

— : Operation cannot be performed when the printer is in this state.

N/A : Does not apply.

Operation	Online	Offline	Required Response

Clear print buffer	—	√	Press MENU and TEAR OFF.

Eject single sheets	√	√	Press LF/FF.

Enter normal mode	N/A	N/A	Turn printer on. (Press on the power switch.)

Enter setup mode	—	√	Press TEAR OFF and ONLINE.

Exit to normal mode	—	√	Press ONLINE, then press TEAR OFF or MENU.

Form feed (forward)	√	√	Press and hold LF/FF until the operation starts.

Line feed (forward)	√	√	Press LF/FF within three seconds.

Load paper	√	√	Press LOAD.

Micro feed (backward)	—	√	Press ONLINE and LOAD.

Micro feed (forward)	—	√	Press ONLINE and LF/FF.

Place printer offline	√	—	Press ONLINE.

Place printer online	—	√	Press ONLINE.

Reset power-on defaults	√	√	Turn printer off, then on.

Resume printing after paper end	—	√	Press ONLINE.

Save adjusted load positions	—	√	Press ONLINE and MENU.

Select MENU1 or MENU2	—	√	Press MENU.

Start/stop/resume printing	√	√	Start: Send print command.
			Stop/resume: Press ONLINE.

Self-test printing	√	√	Start: Turn printer off. Press LF/FF while
			turning printer on.
			Pause/resume: Press TEAR OFF .
			Exit: Press ONLINE.

Tear off forms	√	√	Press TEAR OFF. Tear off forms, then
(Continuous forms only)			press any button to retract forms.

Unload paper to park position	√	√	Press LOAD.
(Continuous forms only)

QR-2	User's Manual

Image 18

Fujitsu DL3750+/3850+ manual Printer Operations Normal Mode, Operation Online Offline Required Response

Contents

Page Page Fujitsu DL3750+/3850+ Using This Product in High-risk Situations Important Note to UsersPage Bescheinigung des Herstellers/Importeurs Energy Saving CE DeclarationTrademark Acknowledgement About this Manual Printer Models and OptionsOrganization Conventions For Experienced UsersTable of Contents Printing Using Setup Mode Installing Options Appendix a Supplies and Options Appendix F Resident Font Glossary of Terms Quick Reference Control panelPrinter Operations Normal Mode Operation Online Offline Required ResponseFeatures Dot matrix printerIntroduction OptionsSetting UP Selecting a GoodLocation Setting UP Checking items received Removing the shipping restraint cardboard Checking Options and Supplies Installing the Cut Sheet Stand Installing the cut sheet standInstalling the Ribbon Cartridge Preparing to install the ribbonInstalling the ribbon cartridge Preparing the ribbon cartridgeSetting Up Handling Paper Printing Setup Mode Getting Acquainted With Your PrinterPrinter components front and right Printer components rear CordConnecting the power cord Loading Paper for the Self-Test Testing the PrinterOffline Loading a sheet of paperPrinting the Self-Test Starting the self-test Sample self-test To exit demo mode, turn the printer off Demo pattern Selecting a Parallel Interface Cable Connecting the PrinterTo Your Computer Selecting a Serial Interface CableSelecting a LAN cable Connecting the Interface CableSelecting a USB Cable Opening the shutterRemoving the shutter Attaching the shutterConnecting the interface cable For Experienced Users Initial printout in setup mode Enter setup modeTurn the printer on and load a sheet of paper Select the MENU1 function Select an emulationOnline Exit setup mode to save the emulationPrinting a Sample Exit MENU1Setting UP Using MS-DOS to Specify Serial Interface Settings Mode LPT1=COM1Installing Printer DriverSetting UP Paper Handling Selecting PaperOverview of Paper OperationsPrinter levers and buttons Levers and Buttons Used for Paper Handling Lever/Button Purpose ActionAdjusting the paper thickness lever Number of Copies Setting *2 Including the Original *1 Paper Thickness Lever SettingsUsing Single Sheets Loading a Single Sheet of PaperAdjusting the left margin Preparing to load a sheet of paperLoading a sheet of paper Using Continuous Ejecting Single SheetsForms Placement of continuous forms Good placementBad placement Positioning the Paper StackPaper thickness lever setting Loading Continuous FormsPreparing to load continuous forms paper Positioning the tractors Ajusting the left marginSetting the back cover Adjusting the Tear OFF position Adjustment procedureInstalling the Tractor Unit Unloading Continuous FormsTearing Off Continuous Forms Tearing off continuous formsLine Feed/Form Feed Load Position AdjustFeeding Positioning PaperSwitching to Single Sheets Failure to retract the forms paper will cause paper jamsSwitching to Continuous Forms Tips on Paper Handling General TipsMultipart Forms Envelopes LabelsPaper Handling Printing Selecting PrintUsing Commercial Software Using the Control PanelPrinter control panel Selecting MENU1 or MENU2 MENU1 and MENU2 Settings MENU1 MENU2Stopping Printing Starting or Stopping PrintingStarting Printing Resuming from a Paper-OutPrinting the remaining lines on a Continuing printing after supplying paperResuming after an Area Over warning Removing Printed Pages Clearing the Print Buffer Removing Single SheetsRemoving Continuous Forms Using Setup Mode HOW to USE this ChapterEntering Setup Mode Initial printout in setup mode Overview of Setup Mode Setup Mode FunctionsSELF-TST DefaultList HEX-DUMPSetup Mode Example Load continuous forms paper Enter setup modeSelect the MENU2 function Summary of setup mode Change the font to Prestige Elite Exit setup mode, saving the new font and pitchSelect the current emulation Select the current print qualityPoints to Remember Selected Options Printer tear-off feature Tear OFF buttonPrinting a List Select the List functionPrintout of factory defaults using List Options to Change System and printer accessory compatibilityDeciding Which Required OptionsSee the section Changing Hardware Adjustment Options later in thisSee the section Changing Configuration See the section Changing Print PositionUsing Setup Mode MENU1 and MENU2 Items and Options Options are reset to the factoryDefaults for that emulation MENU1 Options Description MENU2 ItemsQuality Font TIMLS-N TIMLS-B TIMLS-I DOWNLD#RAM LetterLpi Lpi double spacing CHAR-H AttribNone Italics Condnsd Shadow Bold LFT-END MENU1Options Description MENU2 Items ## ColmTOP-MRG ## LineGerman LangugeUSA SwedishPolish Languge SlovSLOV-T POLSH-TSpanish Languge FrenchItalian DANISH1Italic CHR-SETSET GraphicCR-CODE CR only EnableDisable CR & LFRghtend Wrap OVR-PRTProcedure Select the MENU1 or MENU2 functionResetting MENU1 and MENU2 Exit MENU1 or MENU2Changing Hardware Hardwre Items and OptionsOptions Description Items Print buffer Download buffer With 128KB selected, the printer 0BYTE option is recommendedOnly for graphics application Cannot accept any download fontOptions Description NumberData bits Parity bit Stop bits REV-CHL XON/XOFDTR DSR IgnoreSelect the Hardwre function Select an option for the selected itemChanging Print Position Adjustment Options Adjust Items and Options AdjustGraphic *1 CntadjlAdjust Items and Options Select the Adjust function Exit the Adjust functionSelect an option from 1/6IN to 66/6IN Configuration Options Config Items and OptionsChanging Setting does not match the actual Positioning will fail if the page lengthPerforation spacing Loadtim CutloadButton DecodeON-LOAD SetupAreacnt OfflineEdge CONT-PETractor GatherSKIP-PR Driver Select the Config function Exit the Config functionSelect an option Print the Function menu Settings are usedExiting and Saving Select the Save & END functionResetting Factory Defaults Resetting DefaultsResetting Power-On Defaults Resetting Factory Defaults in MENU1 and MENU2Using the Diagnostic Select the Default functionFunctions Handling Paper Examine the self-test Printing Hex DumpsSelect the SELF-TST function Exit the SELF-TST functionSelect the HEX-DUMP function Print the hex dumpSample hex dump Exit the HEX-DUMP functionChecking Vertical Print Alignment V-ALMNT Adjust the vertical print alignment at draft speed Adjust the vertical print alignment at letter quality speedAdjust the vertical print alignment at correspondence speed Select the V-ALMNT functionTo exit the V-ALMNT function, you must exit setup mode Correct vertical print alignmentExit the V-ALMNT function DPL24C Plus Organization Handling Paper Differences in IBM Proprinter XL24E Emulation Differences in Epson ESC/P2 Emulation Online Setup Mode Maintenance CleaningCleaning and Vacuuming the Printer Flat cable Printer interiorCleaning the Platen and Exit Rollers Paper thickness lever Removing the ribbon cartridgePreparing the ribbon cartridge Dot mark green Replacing the Print HeadReplacing the print head Maintenance TROUBLE-SHOOTING Solving ProblemsPrint Quality Problems Print Quality Problems and Solutions Problem SolutionMENU1 and MENU2 Options in Chapter Using the Diagnostic Functions in ChapterSection Changing MENU1 and MENU2 Changing MENU1 and MENU2 OptionsPaper Handling Problems Paper Handling Problems and SolutionsPaper Handling Problems and Solutions Tips for clearing a jammed sheet from the printer Operating Problems Operating Problems and SolutionsError name Error description Recovery method LED status Area OverError LED states Light Blink Printer FailuresPrinter Failures Diagnostic Functions Getting Help Installing Options Installing Options Option Supplies and OptionsSupplies Supplies Order NumberSupplies and Options Printer and Paper Specifications Physical SpecificationsFunctional Specifications Number of copies Command sets emulationsPaper length Character setsPerformance Specifications Ribbon life Line feed speedForm feed speed CertificationPaper Specifications Print area for single sheetsPrint area for continuous forms Paper Thickness Type of Paper Number of Parts ThicknessDo not use in high humidity environments Printer and Paper Specifications Command Sets Function Command Print Mode Control Fujitsu DPL24CPlus Function Command DC2Horizontal Control ESC MESC P Vertical Control ESC LFFormatting Function Command TabulationNUL ESC OCharacter Set Control Bit Selection of font Word ProcessingFont Selection and Downloading Bit Print qualityFunction = 0 = 1Pitch Point Typeface Bit Font quality selection Function Command Bit Image Graphics Initialize PrinterBar Code Printing Ascii Function Command Miscellaneous BELFactory Default Settings Selectable options in setup mode CommandESC E ESC F NONE, ITALICS, CondnsdSHADOW, Bold ESC G ESC HESC6 DC3 ENABLE, DisableSET 1, SET2 ESC7 SKIP, NO-SKIP ESC N ESC OIBM Proprinter XL24E Emulation DC4DC2 ESC TESC D NUL ESC B NULFunction Command Character Set Control ESC Q #Downloading Select graphics mode in AG mode only ESC * m c 1 c Epson ESC/P2 EmulationSpace Backspace Carriage return Set elite pitch ESC D + d Function Command Character Set Control Font Selection and Downloading OCR-B OCR-A Graphics type m graphics ESC * m n 1 n Interface Information Parallel InterfaceCompatible Mode Pin Return Signal Direc Description Pin No Name TionACK Inprm Pin Return Signal Direc Description Pin NoSlct SLCT-INNibble Mode Name Tion Data Transmission Timing Serial Interface RTSCable Wiring Serial OptionsDSR Serial Protocols Protocol DescriptionXON/XOFF Specification USB InterfaceLAN Interface CableRXI+ Character Sets Character Sets 1 DPL24C Plus and IBM XL24E EmulationCode Page 437 Character Set P2 Emulation Italic and GraphicsCharacter Sets ESC Italic Character SetCharacter National Character Sets ALL Emulations ECMA94, ISO8859, ISO-LTN, ISO-TUK, CYRILIC, LATIN-9PAGE852/PG852-T Code PAGE855 Code PAGE860 Code Page 860Portugal PAGE865 Code Page 865Nordic PAGE866 Code Page 866CyrillicHUNGARY/HUNG-T Hungarian SLOV/SLOV-T Slovenian POLISH/POLSH-T Polish MAZOWIA/MAZOW-T MazowianCharacter Sets IBM437 IBM IBM851 IBM ELOT928 Elot PG-DHN Code Page DHNCharacter Sets MIK Macedon MacedonianABG ABY PG-MAC ELOT927 Decgr Greek PAGE862 HBR OLD HBR DEC ISO-TUKLATIN-9 Ruscii IBM XL24E Emulation National CharacterSets DPL24C Plus French French Italian ItalianDANISH1 Danish1 SPANSH1 Spanish1 DANISH1/NORWEGN Danish1/Norwegian DANISH2 Danish2Sets ESC/P2 Emulation Epson ESC/P2 emulationItalian Italian SPANSH2 Spanish2 Japan JapaneseNorwegn Norwegian French French DANISH2 Danish2 Korea Korea Legal Legal Emulations Sets and SupportedResident Fonts ALL Resident fontPAGE852 National Name Character set Setup menuECMA94 PAGE855PG-MAC ELOT927 LITHUA2 MIKMacedon ABG ABY HBR-DECResident Fonts OCR-B OCR-ACourier Scalable Normal Bold Italic Nimbus Sans ScalableNormal Bold Italic Timeless Scalable Normal Glossary of Terms ByteCondensed print Carriage return CR Centronics interface Column Command setCpi Cps Cut sheets Defaults Dot matrix Continuous formsBase-16 numbering system also commonly referred to as hex Letter size Line feed LF Nonresident font Normal modeLAN interface Line spacing Lpi MonospacingGL-5 Setup mode Serial interfaceTractor feed Unidirectional printingUSB interface GL-8 Index DPL24CPLUS GL-1 Pica SELF-TST ON-LORD Width IN-8 Fujitsu Canada INC Fujitsu ESPANA, S.AFujitsu PHILIPPINES, INC C147-E047-01EN