Fujitsu DL3750+/3850+ Resetting Defaults, Resetting Power-On Defaults, Resetting Factory Defaults

RESETTING DEFAULTS

USING SETUP MODE

This section describes how to reset the printer’s power-on defaults, all of the	Quick Reference
factory defaults, or the factory defaults only for MENU1 and MENU2.

Resetting Power-On Defaults

Power-on defaults are the settings saved in the printer’s permanent memory.	Introduc
The defaults are enabled whenever you turn the printer on. The easiest way
to reset the power-on defaults is to turn the printer off and then on again.
This method is useful if you have made changes in setup mode that you do	-
not want to save.
Factory defaults are those settings preselected at the factory. For a list of the	Setting
Resetting Factory Defaults
printer’s factory defaults, see the section Printing a List of Selected	Up
Options earlier in this chapter. To reset the factory defaults for all functions,
proceed as follows:
1. Turn off the printer.	Paper Handling
2. While pressing the MENU, TEAR OFF, and ONLINE buttons, turn
on the printer. Continue to press all three buttons until the printer
beeps.
The factory defaults are now reset.	Printing
Resetting Factory Defaults in MENU1 and MENU2
This method resets factory defaults for MENU1 and MENU2 options, listed
in Table 5.3, but does not reset the printer hardware, print position adjust-
ment, and configuration options. To reset the factory defaults in MENU1	SetupMode
and MENU2, proceed as follows:

User's Manual 5-49