Fujitsu DL3750+/3850+ manual Dot mark green

MAINTENANCE

9.Align the print head position with the dot mark (green) on the printer ejection cover.

Dot mark (green)

WARNING

Avoid touching the print head while using or immediately after using the printer, as doing so may lead to burns. Wait until the print head cools down before touching it.

10.Thread the ribbon between the print head and the print guide, then gently press down on the ribbon cartridge against the printer until it clicks into place.

(Make sure that the ribbon feed knob is facing upward.)

Print guide

Print head

Ribbon cartridge

Ribbon

Print guide

Tip of print head

11.Turn the ribbon feed knob clockwise to take up any ribbon slack.

12.Move the paper thickness lever back to its original position. For single sheet printing, the correct position is 1. Table 3.2 in Chapter 3 gives other paper thickness lever settings.

13.Close the front cover of the printer.

6-6 User's Manual