Fujitsu DL3750+/3850+ manual Overview of Setup Mode, Setup Mode Functions

USING SETUP MODE

OVERVIEW OF SETUP MODE

The initial printout contains a header, help menu, and <<FUNCTION>> menu. The header tells you that the printer is offline and in setup mode. The help menu provides a quick summary of how to use setup mode. The <<FUNCTION>> menu lists all of the functions available to you in setup mode. Note that the red cursor on the plastic print guide is initially positioned below the SAVE & END function.

Setup mode can also be entered by turning off the printer, then turning the printer back on while pressing the TEAR OFF and ONLINE buttons simulta- neously until the printer beeps.

When you enter setup mode, the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP

V-ALMNT

Table 5.1 summarizes the purpose of each function.

		Table 5.1 Setup Mode Functions
Type	Function		Purpose
Select Function	SAVE & END		Exits setup mode and saves any changes made
			while in setup mode.
	MENU1 and		Assigns print features to MENU1 and
	MENU2		MENU2 on the printer control panel.
	HARDWRE		Changes the printer hardware options.
	ADJUST		Changes the print position adjustment options.
	CONFIG		Changes the configuration options.

5-4 User's Manual