Fujitsu DL3750+/3850+ manual Function Command Tabulation, Nul, Formatting, Esc O

COMMAND SETS (DPL24C PLUS)

Function	Command
Tabulation
Horizontal tab execution	HT
Set horizontal tabs	ESC D (n1) ... (nk)
The values of n1 to nk in this command	NUL
are the ASCII values of the print
columns (at the current character width)
at which tabs are to be set.
(1 < n < 255) (1 < k < 255)
Move to print column n (1 < n < 255)	ESC HT (n)
Move dot column n/360 inch	ESC $ (n1) (n2)
(n = n1 + n2 x 256)
The value below is for 136-column printers.
(0 < n1 255) (0 < n2 < 19)
(0 < n2 x 256 + n1 < 4895)
Horizontal relative move by n/360 inch	ESC e R (s)
(–999 < n1 n2 n3 < +999)	(n1 ) (n2) (n3)
n1, n2, and n3 are the hundreds, tens, and
units digits of the distance. s is a plus
or minus ( + or –) sign.
Vertical tab execution	VT
Set vertical tabs	ESC B (n1) ... (nk)
The values of n1 to nk in this command	NUL
are the ASCII values of the lines (at the
current line spacing) at which tabs are
to be set.
(1 < n < 255) (1 < k < 64)
Move to line n (1 < n < 255)	ESC VT (n)
Page Formatting
Set right margin (0 < n < 255)	ESC Q (n)
Set left margin (0 < n < 255)	ESC l (n)
Set perforation skip by n lines	ESC N (n)
(1 < n < 127)
Perforation skip off	ESC O
Set page length to n lines	ESC C (n) or
(1 < n < 127)	ESC e c (n) or
	ESC FF (n)

C-6 User's Manual