Fujitsu DL3750+/3850+ Positioning will fail if the page length, Setting does not match the actual

USING SETUP MODE

Table 5.6 CONFIG Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

Reference Quick

CONFIG Items	Options	Description
<TEARPOS>		Tearoff position.
	VISIBLE	Select this option when your software
		positions forms to the next top-of-form
		after printing the last data. The printer
		performs tearoff feed without adding a
		form feed when data transfer has
		stopped.
	ALWAYS	Select this option when your software
		stops after printing the last data. The
		printer performs tearoff feed after
		adding a form feed when data transfer
		has stopped.
		Note: For both settings, tearoff
		positioning will fail if the page length
		setting does not match the actual
		perforation spacing.

The following <TEAR-EN> item is printed when TEAROFF:AUTO is specified for the <TEAROFF> item.

<TEAR-EN>		Tearoff enabled time (offset time).
	0 SEC	The offset time is from when data
	1 SEC	transfer stops to when the printer
	2 SEC	performs automatic tearoff feed.
	4 SEC	If the printer receives data again
	6 SEC	within the offset time, the printer does
		not perform automatic tearoff feed.

Introduc- Setting Up

Handling Paper

Printing

SetupMode

User's Manual 5-41