Fujitsu DL3750+/3850+ manual For Experienced Users, Entering Setup Mode

USING SETUP MODE

These sections will familiarize you with how setup mode works. Once you understand the basics, use the following sections to select printer options that are compatible with your computer system’s hardware and software setup:

• Printing a List of Selected Options

• Deciding Which Options to Change

• Changing MENU1 and MENU2 Options

• Changing Hardware Options

• Changing Print Position Adjustment Options

• Changing Configuration Options

• Exiting and Saving

	To restore the printer default settings (factory defaults or power-on defaults),
	see the section Resetting Defaults later in this chapter.
	For information on using the SELF-TST, HEX-DUMP, and V-ALMNT
	functions, see the section Using the Diagnostic Functions later in this
	chapter.
	For Experienced Users:
	Once you are familiar with setup mode, you may want to use the flowchart at
	the end of this chapter for quick reference. The flowchart lists all printer
	setup functions, items, and options.
ENTERING SETUP MODE	Before entering setup mode, load continuous forms paper into the printer as
	described in Chapter 3. Several sheets of paper may be required to make all of
	your setup mode selections.
	To enter setup mode, follow these steps:
	1. Make sure that continuous forms paper is loaded and that the paper
	select lever is set backward.
	2. Press the ONLINE button to place the printer offline.

5-2 User's Manual