Fujitsu DL3750+/3850+ manual Graphic *1, Cntadjl

USING SETUP MODE

Table 5.5 ADJUST Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

ADJUST	Options	Description
Items
<CNT-LFT>		Fine-tunes the left print start
		position for continuous forms.
	–10/90, ..., 0/90,	Moves the position left or
	..., 10/90	right in increments of 1/90
		inch (0.28 mm).
<CUT-LFT>		Fine-tunes the left print start
		position for single sheets.
	–10/90, ..., 0/90,	Moves the position left or
	..., 10/90	right in increments of
		1/90 inch (0.28 mm).
<CUT-ADJ>		Compensates the line spacing
		pitch on the basis of the
		spacing error accumulated for
		feeding single sheets by10
		inches.
	–21/360, –14/360,	Decreases or increases in
	–7/360, 0/360,	increments of 1/360 inch in
	7/360, 14/360, 21/360,	total.
	GRAPHIC (*1)
<CNT-ADJ>	–28/360, –21/360,	Compensates for the forms
	–14/360, –7/360, 0/360,	feed error accumulated
	7/360, 14/360, 21/360,	through feeding of continuous
	28/360, GRAPHIC (*1)	forms.
<CNTADJL>	–21/360, –14/360,	Compensates for the forms
	–7/360, 0/360,
		feed error accumulated
	7/360, 14/360, 21/360,
		through feeding of continuous
	GRAPHIC (*1)
		forms. (Last page)

Reference	Quick
Introduc-
Setting
Up

Handling Paper

Printing

SetupMode

*1:When printing graphics, selecting "GRAPHIC" may result in the printing of clearer graphics.

User's Manual 5-37