Fujitsu DL3750+/3850+ manual Resuming after an Area Over warning

PRINTING

Resuming after an Area Over warning

The printer senses the left and right edges of paper and stores their positions when the paper is loaded. If your software will print data past either edge, the printer ignores that data but does not stop printing. Rather, the AREA OVER indicator lights to call your attention to the loss of data.

The AREA OVER indicator functions when AREACNT (area control) is set to ENABLE in setup mode. See Chapter 5 for information on setting AREACNT. The factory default is not to sense the edges. If paper is dark- colored or preprinted, the printer may not be able to sense the edges correctly. In this case, disable the sensor.

To resume printing when the AREA OVER indicator is on:

1.Stop your software and press the ONLINE button to place the printer offline.

2.Adjust the horizontal position of the paper or change the margin settings in the printer setup menu or your software.

3.Press the ONLINE button to place the printer online. Restart the software from the page that includes the lost data.

Reference	Quick
Introduction
SettingUp
Handling	Paper

Printing Setup Mode

User's Manual 4-7