Rghtend Wrap, Ovr-Prt | Fujitsu DL3750+/3850+ guide

USING SETUP MODE

Table 5.3 MENU1 and MENU2 Items and Options (Cont.)

NOTES:

•Underlined options are the factory defaults.

•Asterisks identify items and options that differ for the IBM XL24E and Epson ESC/P2 emulations. The notes are defined at the end of the table.

	MENU1 and		Options	Description
	MENU2 Items		Options	Description
	MENU2 Items

	<RGHTEND>		WRAP	End-of-line wrap. Causes a carriage
				return plus a line feed.
			OVR-PRT	Characters are overprinted at the end of a
				line.

	<==END==>			Indicates the end of MENU1 items. Press
				the MENU button to print the first item,
				<EMULATE>. Press the TEAR OFF
				button to print the previous item,
				<RGHTEND>. Press the ONLINE button
				to reprint the <<FUNCTION>> menu.

	*1	Unavailable in the IBM XL24E emulation
	*2	Unavailable in the Epson ESC/P2 emulations
	*3	Available only in the Epson ESC/P2 emulations
	*4	Available only in the DPL24C+ emulation
	*5	Available only for 136-column printers

5-26	User's Manual

Image 104

Fujitsu DL3750+/3850+ manual Rghtend Wrap, Ovr-Prt

Contents

Page Page Fujitsu DL3750+/3850+ Using This Product in High-risk Situations Important Note to UsersPage Bescheinigung des Herstellers/Importeurs Energy Saving CE Declaration Trademark Acknowledgement About this Manual Printer Models and Options Organization Conventions For Experienced Users Table of Contents Printing Using Setup Mode Installing Options Appendix a Supplies and Options Appendix F Resident Font Glossary of Terms Quick Reference Control panel Printer Operations Normal Mode Operation Online Offline Required Response Features Dot matrix printer Introduction Options Location Setting UPSelecting a Good Setting UP Checking items received Removing the shipping restraint cardboard Checking Options and Supplies Installing the Cut Sheet Stand Installing the cut sheet stand Installing the Ribbon Cartridge Preparing to install the ribbon Installing the ribbon cartridge Preparing the ribbon cartridge Setting Up Handling Paper Printing Setup Mode Printer components front and right Getting AcquaintedWith Your Printer Printer components rear Cord Connecting the power cord Testing the Printer OfflineLoading Paper for the Self-Test Loading a sheet of paper Printing the Self-Test Starting the self-test Sample self-test To exit demo mode, turn the printer off Demo pattern Connecting the Printer To Your ComputerSelecting a Parallel Interface Cable Selecting a Serial Interface Cable Connecting the Interface Cable Selecting a USB CableSelecting a LAN cable Opening the shutter Removing the shutter Attaching the shutter Connecting the interface cable For Experienced Users Turn the printer on and load a sheet of paper Initial printout in setup modeEnter setup mode Select the MENU1 function Select an emulation Exit setup mode to save the emulation Printing a SampleOnline Exit MENU1 Setting UP Using MS-DOS to Specify Serial Interface Settings Mode LPT1=COM1 Installing Printer Driver Setting UP Paper Handling Selecting Paper Printer levers and buttons Overview of PaperOperations Levers and Buttons Used for Paper Handling Lever/Button Purpose Action Adjusting the paper thickness lever Paper Thickness Lever Settings Using Single SheetsNumber of Copies Setting *2 Including the Original *1 Loading a Single Sheet of Paper Adjusting the left margin Preparing to load a sheet of paper Loading a sheet of paper Forms Using ContinuousEjecting Single Sheets Good placement Bad placementPlacement of continuous forms Positioning the Paper Stack Preparing to load continuous forms paper Paper thickness lever settingLoading Continuous Forms Positioning the tractors Ajusting the left margin Setting the back cover Adjusting the Tear OFF position Adjustment procedure Installing the Tractor Unit Unloading Continuous Forms Tearing Off Continuous Forms Tearing off continuous forms Load Position Adjust FeedingLine Feed/Form Feed Positioning Paper Switching to Single Sheets Failure to retract the forms paper will cause paper jams Multipart Forms Switching to Continuous FormsTips on Paper Handling General Tips Envelopes Labels Paper Handling Printing Selecting Print Printer control panel Using Commercial SoftwareUsing the Control Panel Selecting MENU1 or MENU2 MENU1 and MENU2 Settings MENU1 MENU2 Starting or Stopping Printing Starting PrintingStopping Printing Resuming from a Paper-Out Printing the remaining lines on a Continuing printing after supplying paper Resuming after an Area Over warning Removing Continuous Forms Removing Printed Pages Clearing the Print BufferRemoving Single Sheets Using Setup Mode HOW to USE this Chapter Entering Setup Mode Initial printout in setup mode Overview of Setup Mode Setup Mode Functions Default ListSELF-TST HEX-DUMP Select the MENU2 function Setup Mode ExampleLoad continuous forms paper Enter setup mode Summary of setup mode Exit setup mode, saving the new font and pitch Select the current emulationChange the font to Prestige Elite Select the current print quality Points to Remember Printer tear-off feature Tear OFF button Printing a ListSelected Options Select the List function Printout of factory defaults using List System and printer accessory compatibility Deciding WhichOptions to Change Required Options Adjustment Options later in this See the section Changing ConfigurationSee the section Changing Hardware See the section Changing Print Position Using Setup Mode Options are reset to the factory Defaults for that emulationMENU1 and MENU2 Items and Options MENU1 Options Description MENU2 Items Font TIMLS-N TIMLS-B TIMLS-I DOWNLD# RAMQuality Letter Lpi Lpi double spacing None Italics Condnsd Shadow Bold CHAR-HAttrib MENU1 Options Description MENU2 ItemsLFT-END ## Colm TOP-MRG ## Line Languge USAGerman Swedish Languge Slov SLOV-TPolish POLSH-T Languge French ItalianSpanish DANISH1 CHR-SET SETItalic Graphic Enable DisableCR-CODE CR only CR & LF Rghtend Wrap OVR-PRT Procedure Select the MENU1 or MENU2 function Resetting MENU1 and MENU2 Exit MENU1 or MENU2 Options Description Items Changing HardwareHardwre Items and Options Print buffer Download buffer 0BYTE option is recommended Only for graphics applicationWith 128KB selected, the printer Cannot accept any download font Data bits Parity bit Stop bits Options DescriptionNumber XON/XOF DTRREV-CHL DSR Ignore Select the Hardwre function Select an option for the selected item Changing Print Position Adjustment Options Adjust Items and Options Adjust Graphic *1 Cntadjl Adjust Items and Options Select an option from 1/6IN to 66/6IN Select the Adjust functionExit the Adjust function Changing Configuration OptionsConfig Items and Options Perforation spacing Setting does not match the actualPositioning will fail if the page length Cutload ButtonLoadtim Decode Setup AreacntON-LOAD Offline CONT-PE TractorEdge Gather SKIP-PR Driver Select an option Select the Config functionExit the Config function Settings are used Exiting and SavingPrint the Function menu Select the Save & END function Resetting Defaults Resetting Power-On DefaultsResetting Factory Defaults Resetting Factory Defaults in MENU1 and MENU2 Functions Using the DiagnosticSelect the Default function Handling Paper Printing Hex Dumps Select the SELF-TST functionExamine the self-test Exit the SELF-TST function Select the HEX-DUMP function Print the hex dump Sample hex dump Exit the HEX-DUMP function Checking Vertical Print Alignment V-ALMNT Adjust the vertical print alignment at letter quality speed Adjust the vertical print alignment at correspondence speedAdjust the vertical print alignment at draft speed Select the V-ALMNT function Exit the V-ALMNT function To exit the V-ALMNT function, you must exit setup modeCorrect vertical print alignment DPL24C Plus Organization Handling Paper Differences in IBM Proprinter XL24E Emulation Differences in Epson ESC/P2 Emulation Online Setup Mode Cleaning and Vacuuming the Printer MaintenanceCleaning Flat cable Printer interior Cleaning the Platen and Exit Rollers Paper thickness lever Removing the ribbon cartridge Preparing the ribbon cartridge Dot mark green Replacing the print head Replacing the PrintHead Maintenance Print Quality Problems TROUBLE-SHOOTINGSolving Problems Print Quality Problems and Solutions Problem Solution Using the Diagnostic Functions in Chapter Section Changing MENU1 and MENU2MENU1 and MENU2 Options in Chapter Changing MENU1 and MENU2 Options Paper Handling Problems Paper Handling Problems and Solutions Paper Handling Problems and Solutions Tips for clearing a jammed sheet from the printer Error name Error description Recovery method Operating ProblemsOperating Problems and Solutions LED status Area Over Printer Failures Error LED states Light BlinkPrinter Failures Diagnostic Functions Getting Help Installing Options Installing Options Supplies and Options SuppliesOption Supplies Order Number Supplies and Options Printer and Paper Specifications Physical Specifications Functional Specifications Command sets emulations Paper lengthNumber of copies Character sets Performance Specifications Line feed speed Form feed speedRibbon life Certification Paper Specifications Print area for single sheets Print area for continuous forms Paper Thickness Type of Paper Number of Parts Thickness Do not use in high humidity environments Printer and Paper Specifications Command Sets Plus Function Command Print Mode ControlFujitsu DPL24C Function Command DC2 ESC P Horizontal ControlESC M Vertical Control ESC LF Function Command Tabulation NULFormatting ESC O Character Set Control Word Processing Font Selection and DownloadingBit Selection of font Bit Print quality Function = 0 = 1 Pitch Point Typeface Bit Font quality selection Bar Code Printing Function Command Bit Image GraphicsInitialize Printer Ascii Function Command Miscellaneous BEL Factory Default Settings Selectable options in setup mode Command NONE, ITALICS, Condnsd SHADOW, BoldESC E ESC F ESC G ESC H DC3 ENABLE, Disable SET 1, SET2 ESC7ESC6 SKIP, NO-SKIP ESC N ESC O IBM Proprinter XL24E Emulation DC4 DC2 ESC T ESC D NUL ESC B NUL Downloading Function Command Character Set ControlESC Q # Select graphics mode in AG mode only ESC * m c 1 c Epson ESC/P2 Emulation Space Backspace Carriage return Set elite pitch ESC D + d Function Command Character Set Control Font Selection and Downloading OCR-B OCR-A Graphics type m graphics ESC * m n 1 n Interface Information Parallel Interface ACK Compatible ModePin Return Signal Direc Description Pin No Name Tion Pin Return Signal Direc Description Pin No SlctInprm SLCT-IN Nibble Mode Name Tion Data Transmission Timing Serial Interface RTS Cable Wiring Serial Options DSR XON/XOFF Serial ProtocolsProtocol Description Specification USB Interface RXI+ LAN InterfaceCable Code Page 437 Character Set Character SetsCharacter Sets 1 DPL24C Plus and IBM XL24E Emulation Italic and Graphics Character Sets ESCP2 Emulation Italic Character Set Character National Character Sets ALL Emulations ECMA94, ISO8859, ISO-LTN, ISO-TUK, CYRILIC, LATIN-9 PAGE852/PG852-T Code PAGE855 Code PAGE860 Code Page 860Portugal PAGE865 Code Page 865Nordic PAGE866 Code Page 866Cyrillic HUNGARY/HUNG-T Hungarian SLOV/SLOV-T Slovenian POLISH/POLSH-T Polish MAZOWIA/MAZOW-T Mazowian Character Sets IBM437 IBM IBM851 IBM ELOT928 Elot PG-DHN Code Page DHN Character Sets ABG ABY MIKMacedon Macedonian PG-MAC ELOT927 Decgr Greek PAGE862 HBR OLD HBR DEC ISO-TUK LATIN-9 Ruscii National Character Sets DPL24C PlusIBM XL24E Emulation French French Italian Italian DANISH1/NORWEGN Danish1/Norwegian DANISH2 Danish2 Sets ESC/P2 EmulationDANISH1 Danish1 SPANSH1 Spanish1 Epson ESC/P2 emulation Italian Italian SPANSH2 Spanish2 Japan Japanese Norwegn Norwegian French French DANISH2 Danish2 Korea Korea Legal Legal Sets and Supported Resident Fonts ALLEmulations Resident font National Name Character set Setup menu ECMA94PAGE852 PAGE855 LITHUA2 MIK Macedon ABG ABYPG-MAC ELOT927 HBR-DEC Resident Fonts OCR-B OCR-A Normal Bold Italic Timeless Scalable Normal Courier Scalable Normal Bold ItalicNimbus Sans Scalable Glossary of Terms Byte Carriage return CR Centronics interface Column Command set Cpi Cps Cut sheets Defaults Dot matrixCondensed print Continuous forms Base-16 numbering system also commonly referred to as hex Nonresident font Normal mode LAN interfaceLetter size Line feed LF Line spacing Lpi Monospacing GL-5 Setup mode Serial interface USB interface Tractor feedUnidirectional printing GL-8 Index DPL24CPLUS GL-1 Pica SELF-TST ON-LORD Width IN-8 Fujitsu PHILIPPINES, INC Fujitsu Canada INCFujitsu ESPANA, S.A C147-E047-01EN