Fujitsu DL3750+/3850+ manual Print buffer Download buffer

USING SETUP MODE

Table 5.4 HARDWRE Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

HARDWRE	Options		Description
Items
<PRT-DIR>	BI-DIR	Bidirectional printing. The printer prints
		in either direction while seeking the next
		print direction for a shorter print time.
	UNI-DIR	Unidirectional printing. Unidirectional
		printing is used for printing vertical lines
		in tables even if vertical alignment is not
		adjusted. Unidirectional printing is
		slower than bidirectional printing.
<BUZZER>		Enables or disables the printer status
		buzzer.
	ON	Buzzer on (recommended).
		The printer beeps to indicate paper-
		out or other conditions.
	OFF	Buzzer off under any conditions.
<WORD-LG>		To determine the required word
		length, refer to your computer
		documentation. Select 8-BIT to print bit
		image graphics.
	8 BIT	8-bit word length (used by most
		computers)
	7 BIT	7-bit word length (MSB = 0)
<BUFFER>		Assigns buffer memory to input data and
		downloaded font data.
		Print buffer	Download buffer
	NONE	0 byte	128K bytes
	256BYTE	256 bytes	127.75K bytes
	2KBYTE	2K bytes	126K bytes
	8KBYTE	8K bytes	120K bytes
	24KBYTE	24K bytes	104K bytes
	32KBYTE	32K bytes	96K bytes
	96KBYTE	96K bytes	32K bytes
	128KBYT	128K bytes	0K bytes

5-30 User's Manual