Fujitsu DL3750+/3850+ manual Paper Handling Problems and Solutions

TROUBLE-SHOOTING

Table 7.2 Paper Handling Problems and Solutions (Cont.)

Problem	Solution
Paper jams while	Move the paper thickness lever to position D.
loading.	Turn off the printer and remove the jammed
	paper. Remove any obstructions from the paper
	path.
	Make sure that the paper thickness lever is set for the
	thickness of your paper. See Table 3.2 in Chapter 3.
	Make sure that the paper is not folded, creased, or
	torn.
	Reload the paper.
Paper jams while	Move the paper thickness lever to position D.
printing.	Turn off the printer and remove the jammed
	paper. Remove any obstructions from the paper
	path.
	Make sure that the paper thickness lever is set for the
	thickness of your paper. See Table 3.2 in Chapter 3.
	For continuous forms, make sure that the incoming
	and outgoing paper stacks are correctly placed.
	Paper should feed straight.
Paper slips off the	Make sure that the forms tractors are positioned
forms tractors or	correctly for the width of your paper and that
the perforated	the perforated holes of the paper fit directly over
holes of the paper	the tractor sprockets.
tear during
printing.

shooting Trouble-

User's Manual 7-5