Programmable settings
Problem Cause/solution
The display is in a
language I cannot read.
RChange the display language (page 14).
I cannot activate the eco
mode.
RYou cannot set eco mode when you set the repeater mode
“On”. If required, set the repeater mode to “Off” (page 31).
I cannot register a handset
to a base unit.
RYou entered the wrong PIN. If you forget your PIN, contact an
authorised service centre.
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
RBattery charge is low. Fully charge the batteries (page 10).
I fully charged the
batteries, but
– still flashes or
– the operating time
seems to be shorter.
RClean the battery ends ( , ) and the charge contacts with
a dry cloth and charge again.
RIt is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem Cause/solution
is displayed. RThe handset is too far from the base unit. Move closer.
RThe base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
RThe handset is not registered to the base unit. Register it
(page 49).
RActivating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 15).
Noise is heard, sound cuts
in and out.
RYou are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
RMove closer to the base unit.
RIf you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset does not ring. RThe ringer volume is turned off. Adjust ringer volume (page 17,
25).
RNight mode is turned on. Turn it off (page 29).
The base unit does not
ring.
RThe ringer volume is turned off. Adjust ringer volume (page 25).
47
Useful Information
TG68xxBX_UE(en)_0523_ver021.pdf 47 2013/05/23 16:41:17