Programming
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
Ring count | {2}{1}{1} | r | 34 | |
|
| {0}: Toll saver |
|
|
Ringer tone*4, *5 | {1}{6}{1} | – | – | |
(Handset) |
|
|
| |
Ringer volume | {1}{6}{0} | {1}: Low {2}: Medium | – | – |
(Handset) |
| {3}: <High> {0}: Off |
|
|
Set dial mode | {1}{2}{0} | {1}: Pulse | r | 14 |
|
| {2}: <Tone> |
|
|
Set flash | {1}{2}{1} | {1}: <700ms> | r | 16 |
time*6 |
| {2}: 600ms |
|
|
|
| {3}: 400ms |
|
|
|
| {4}: 300ms |
|
|
|
| {5}: 250ms |
|
|
|
| {6}: 110ms |
|
|
|
| {7}: 100ms |
|
|
|
| {8}: 90ms |
|
|
Set line mode*7 | {1}{2}{2} | {1}: A {2}: <B> | r | – |
Store VM | {3}{3}{1} | – | r | 36 |
access# |
|
|
|
|
Time | {2}{2}{6} | {1}: <Caller ID | r | – |
adjustment*8 |
| [auto]> |
|
|
(Caller ID |
| {0}: Manual |
|
|
subscribers only) |
|
|
|
|
V.M. access | {3}{3}{0} | – | – | 37 |
VM tone detect | {3}{3}{2} | {1}: <On> {0}: Off | r | 36 |
Voice prompt | {1}{1}{2} | {1}: <English> | r | 14 |
(Change language) |
| {2}: Español |
|
|
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as
*5 If you select one of the melody ringer tones, the ringer tone will continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the waiting call.
For assistance, please visit http://www.panasonic.com/help | 23 |
