Answering System
1{GREETING REC}
2Within 10 seconds, press
{GREETING REC} again.
3After the base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC.
4Press {■} (STOP) to stop recording.
Using a pre-recorded greeting message
If you erase or do not record your own greeting message, the unit plays a pre- recorded greeting message for callers and asks them to leave messages. If the message recording time (page 35) is set to “Greeting only”, caller messages are not recorded and the unit plays a different
Playing back the greeting message
Press {GREETING CHECK}.
Erasing your greeting message
If you erase your own greeting message, the unit plays a
Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing.
Listening to messages using the base unit
When new messages have been recorded, the message indicator on the base unit flashes.
Press {6}.
LIf new messages have been recorded, the base unit plays back new messages.
L If there are no new messages, the base unit plays back all messages.
Operating the answering system
Key | Operation |
{^} or {V} | Adjust the speaker |
| volume |
{7} | Repeat message |
| (during playback)*1 |
{8} | Skip message |
| (during playback) |
{■} | Pause message |
(STOP) | – To resume playback, |
| press {6}. |
| – To stop playback |
| completely, press |
| {■} (STOP) again. |
{ERASE} | Erase currently playing |
| message |
*1 If pressed within the first 5 seconds of a message, the previous message is played.
Erasing all messages
Press {ERASE} 2 times while the unit is not being used.
For assistance, please visit http://www.panasonic.com/help | 31 |
