Panasonic KXTG4321, KX-TGA931T Battery installation and replacement, During a power failure

Preparation

Note:

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 5). Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 5.

If you subscribe to a DSL/ADSL service

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–noise is heard during conversations.

–Caller ID features do not function properly.

To single-line telephone jack (RJ11C)

DSL/ADSL filter

Battery installation and replacement

Important:

L Use the supplied rechargeable batteries (Part No. HHR-65AAABU).

L When installing the batteries:

–Wipe the battery ends (S, T) with a dry cloth.

–Avoid touching the battery ends (S, T) or the unit contacts.

–Ensure correct polarities (S, T). L When replacing the batteries:

–USE ONLY rechargeable Ni-MH batteries AAA (R03) size.

–Do NOT use Alkaline/Manganese/Ni-Cd batteries.

–We recommend using the Panasonic rechargeable batteries noted on page 5, 7.

1Press the notch on the handset cover firmly, and slide it in the direction of the arrow.

2Insert the batteries negative (T) end first. Close the handset cover.

Rechargeable Ni-MH ONLY

For assistance, please visit http://www.panasonic.com/help 11