Programming

L When the handset is in use, the alarm will not sound until the handset is in standby mode.

L If you select Once, the setting changes to Offafter the alarm sounds.

L When the ringer volume for outside calls is set to off (page 23), the alarm sound is heard at a low level.

Customer support

The handset can display the Internet address where you can download the operating instructions or get further information for this product by using your computer.

1{MENU} i{#}{6}{8}{0}

2{OFF}

Registering a unit

Operating additional handsets

Additional handsets

Up to 4 handsets can be registered to the base unit.

Important:

L See page 5 for information on the available model.

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset.

1Handset:

{MENU} i{#}{1}{3}{0}

2Base unit:

Press and hold {LOCATOR} for 4 seconds until the registration tone sounds.

L If all registered handsets start ringing, press the same button to stop. Then repeat this step.

L The next step should be completed within 90 seconds.

3Handset:

Press {OK}, then wait until a long beep sounds.

4{OFF}

Note:

LWhile registering, Base registeringis displayed on all registered handsets.

L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.

Deregistering a handset

A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This allows the handset to end its wireless connection with the system.

1{MENU} i{#}{1}{3}{1}

2{3}{3}{5} i{OK}

3Select the handset you want to cancel by pressing the desired handset number.

26For assistance, please visit http://www.panasonic.com/help

Page 26
Image 26
Panasonic KX-TGA931T, KXTG4321 operating instructions Registering a unit, Customer support, Operating additional handsets