GCaller ID Service
Editing a caller’s phone number before calling back Y ^
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
Handset
1
2
3 Press {EDIT} repeatedly until the phone number is shown in the desired format.
1Local phone number Example:
2Area code – Local phone number
Example: 555-321-5555
31 – Area code – Local phone number
Example:
4 {C}
Base unit
1
2
3 Press {EDIT} repeatedly until the phone number is shown in the desired format.
1Local phone number Example:
2Area code – Local phone number
Example:
31 – Area code – Local phone number
Example:
4 {SP-PHONE}
Caller ID number auto edit feature
Once you call back an edited number, the unit will remember the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information will be customized by the unit as follows:
–When the call is being received, the Caller ID number will be displayed in the same Format as the Edited Number.
–After the call is ended, the telephone number of the caller, when reviewed
from the Caller list, will be displayed in the same Format as the Edited Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be turned on or off (page 41). The default setting is “On”.
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
For assistance, please visit http://www.panasonic.com/phonehelp | 29 |
