Panasonic KXTH111 Monitoring feature, Audio monitor, Enabling monitoring access

FMonitoring

Monitoring feature

This feature allows you to monitor the room where a unit is located. The monitored unit does not ring, allowing you to easily monitor a baby’s room, for example, from different areas of the house.

Enabling monitoring access

Y^

To use the monitoring feature, you need to set the destination unit to be monitored beforehand.

–“Permit”: allows the unit to be monitored.

–“Deny”: denies access from other units.

Handset

1 {MENU} (center of joystick) ihi {SELECT}

2 “Monitor access” i{SELECT}

3 Select the desired setting. (Default:

“Deny”) i{SAVE} i{OFF}

Base unit

1 {MENU} ihi{SET}

2 “Monitor access” i{SET}

3 Select the desired setting. (Default: “Deny”) i{SET} i{STOP}

Audio monitor

This feature allows you to listen to the audio in a room where the handset or base unit is located.

Before using this feature, allow access to the destination unit by selecting “Permit” in the monitor access setting (page 36).

Monitoring audio in a room

Y^

Handset

1 {MENU} (center of joystick) iF

i{SELECT}

2 Select the desired unit. i{SELECT} LYou can listen to the audio.

3 Press {OFF} to stop monitoring.

Base unit

1 {MENU} iFi{SET}

2 Select the desired unit. i{SET} LYou can listen to the audio.

3 Press {SP-PHONE} to stop monitoring.

Note for handset and base unit:

LTo start monitoring quickly, press {INTERCOM}, then press {*} instead of step 1.

36For assistance, please visit http://www.panasonic.com/phonehelp