![](/images/new-backgrounds/1257691/257691135x1.webp)
Useful Information
Troubleshooting
General use
Problem | Cause/solution |
The unit does not work. | LMake sure that the battery is installed correctly and fully |
| charged (page 10). |
| LCheck the connections (page 9). |
| LUnplug the base unit’s AC adaptor to reset the unit. |
| Reconnect the adaptor and try again. |
| LThe handset has not been registered to the base unit. |
| Register the handset (page 43). |
I cannot hear a dial tone. | LConfirm that the telephone line cord is properly |
| connected (page 9). |
| LDisconnect the base unit from the telephone line and |
| connect a known working telephone. If the working |
| telephone operates properly, contact our service |
| personnel to have the unit repaired. If the working |
| telephone does not operate properly, contact your |
| telephone service provider. |
|
|
“Recharge battery” is | LThe battery power is low. Fully charge the battery (page |
displayed and I cannot | 10) and try again. |
perform the following |
|
operations: |
|
– recording or erasing a |
|
customized ringer |
|
– editing a title for a |
|
customized ringer |
|
|
|
|
|
Programmable settings |
|
|
|
Problem | Cause/solution |
I cannot program items. | LWhile another user is listening to messages or the |
| answering system is answering a call, you cannot |
| program items. Try again later. |
|
|
While programming, the | LA call is being received. Answer the call and start again |
handset starts to ring. | after hanging up. |
68For assistance, please visit http://www.panasonic.com/phonehelp