Cleaning Agitator
➢ Clean agitator after every five uses and every time the belt is replaced.
➢ Remove lower plate. See: “Removing and Installing Lower Plate”
➢ Cut off any hair, thread, string, carpet pile, and lint entangled around agitator with a pair of scissors.
➢ Remove agitator. See: “Replacing
Belt”
➢ Remove any string or debris located on the end caps, washers or agitator shaft.
➢ Reinstall agitator and lower plate.
See: “Removing and Installing Lower Plate”
Cleaning Exterior and Tools
➢Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water and wrung dry.
➢DO NOT drip water on vacuum cleaner
➢Wipe dry after cleaning.
➢DO NOT clean tools in dishwasher or clothes washer.
➢Wash tools in warm soapy water, rinse and air dry.
➢DO NOT use tools if they are wet.
- 42 -
