Overload Protection
OVERLOAD
PROTECTION RESET button Bouton de remise
en circuit de la protection de surcharge Protector contra sobrecargas (Botón de restauración)
➢The OVERLOAD PROTECTION RESET button stops the nozzle motor when the brush jams to prevent belt breakage.
NOTE: The vacuum cleaner motor will continue to run.
TO CORRECT PROBLEM:
➢Unplug electrical cord.
➢Check nozzle areas for excessive lint buildup or jamming.
➢Clean jammed area.
TO RESET:
➢Press reset button on top of the nozzle. Plug in and turn on vacuum cleaner.
Thermal Protector
➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum cleaner.
➢To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or clean/replace filters.
➢Replace full bag if necessary.
➢Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not turned off even if vacuum cleaner cools down.
- 20 -
