10
Ag Crystal Shower Course
Keep clothes clean with Ag Crystal Shower.
1 Press the [Power On] button and put in the laundry.
2 Press the [Program] button and select
“Normal’’, “Blanket”, “Delicate”, “Extra
Rinse” or “Soak” Course.
•
[Ag Crystal Shower] Course can be used with only
“Normal’’, “Blanket”, “Delicate’’, “Extra Rinse” and
“Soak” Course.
• The light of the course which you have selected
will be indicated.
3
Press the [Ag Shower] button.
• [Ag Shower] light will be indicated.
•
Press the [Ag Shower] button again if you want to cancel it.
4Press the [Start/Pause] button. • You can adjust the water level an d process timing
according to your desire.
•
To change the process timing, press the [Start/Pause]
button first.
5Put in the appropriate amount of detergent
into the detergent drawer for the water
level. Then close the lid.
7 Add softener. See page 7 for details.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds other
than 40 grams, add the amount of detergent
recommended by the detergent maker for the
selected water level. See page 6 for details.
• Water may not be supplied if the lid is open,
depending on the setting of a water level.
The buzzer lets you know when the washing is finished.
• The power of Ag ion coating protects clothes from bacteria and prevents unpleasant odor while wearing or hung out to dry
in the room.
• In the initial stage of Ag ion usage, the deodorizing fiber product will begin by being expanded using another field and will
be safe for contact with human skin. This function will start before the final spinning. Ag ion will be combined with the
shower water supply and Ag ion will stick to the clothes and will function as an anti-bacterial for keeping the clothes clean.
Inspection institute: Japan Food Research Laboratories
Test method: JIS L 1902:2002 (Chemical absorption method)
Bacteria tested: Yellow staphylococcus
[NOTE]
• If Ag Crystal Shower Course is selected, Ag light
will turn off except for “Normal”, “Blanket”
“Delicate” “Extra Rinse” or “Soak” Course.
• When the [Ag Shower] light blink swiftly, the time
to exchange Ag Crystal agent.
1
4
2
3
Ag Crystal Coating
When press the [Ag Shower] button and Ag light flashes quickly, it’s time to exchange Ag Crystal agent.
Life cycle of Ag Crystal agent replacement
Life cycle of Ag Crystal agent depends on water properties, water temperature and water supply volume,
Ag Crystal agent can be used approx. 1300 times (3 to 4 years if used once a day).
This function can be used directly without Ag Crystal agent. However in such case, Ag Crystal coating is inefficiency. When you
want to use the Ag ion coating function, replace with separately sold the Ag Crystal agent after ordering from the service center.
[NOTE]
•
Do not use this function for purposes other than ion coating to protect clothes. (Such as drinking water.)
•
Clothes with Ag ion coating may cause irritation to human skin. Irritation may affect people with metal allergy.
The level of irritation will differ for each individual person. If any irritation occurs, stop usage immediately.
• Effectiveness of Ag ion coating may decrease depending on type of clothes, detergent, softener or water properties.
• More effective usage of ion coating:
Ag ion coating on clothes made of cotton or polyester and washing with a powder detergent.
• Conditions which reduce the effectiveness of ion coating:
Clothes having non absorption efficiency such as nylon, wool, acrylics and silk. Moreover washing with liquid
detergent, softener or starch.
• After using the softener, liquid detergent or dry cleaning detergent, clothes may turn slightly yellow
depending of material of clothes. (The original color is recovered after washing is finished.)
• If you do not select the “Spin” function, Ag ion coating cannot be used.
NA-F90H2_EN_AR-PE-V2.indd 10 11/23/11 3:41:29 PM