Panasonic NA-F90H2 operating instructions Operations Panel

NA-F90H2_EN_AR-PE-V2.indd 9

Operations Panel

Water Level (Water Volume Display)

•The appropriate Water Level for the size and type of your own laundry will be displayed

(Linear Water Level).

•You can adjust the Water Level according to your desired level.

Time display

•When the machine is in operation, the time display shows how much time (in minutes) is left.

•When the Programmable timer has been set, this display shows how much time is left until the wash is finished by pressing the [Reserve] button.

•Timer indication on the panel will show longer time than selected time as it includes water feeding, draining, etc.

Off/On

•The power automatically turns off when total operations is finished.

•The power automatically turns off if [Start/Pause] button is not pressed within 10 minutes after turning on the power.

Wash, Spin

•Press this button, and the pre-set laundry cycle display will turn off allowing you to choose your own laundry setting.

	Rinse	Reserve
•	Press this button,	• Press the [Reserve]
	and the pre-set	button to set how
	laundry cycle display	many hours later
	will turn off allowing	you would like
	you to choose your	the wash to be
•	own laundry setting.	completed. See
	At “Refill” selection,	page 15 for details.
	water will be supplied
	while “Rinse” process
	is in operation.

Air Dry	Program (Course Select)		Start/Pause
• To Perform the Air Dry.	• According to type of laundry and	•	Press this to start.
See page 14 for details.	stain, you can select suitable	•	Press this to stop in the
	course yourself.		middle of the cycle.

Ag Crystal Shower

•Choose when you want to coat of • This button cannot be operated after the

•	the clothing with Ag+ ion.	•	cycle has already started.
	Lamp lighting of the upper of the		This function can be used for the course
	button is telling that you have		of “Normal”, “Blanket”, “Delicate”, “Extra
	chosen this function.		Rinse” and “Soak”.

11/23/11		9
	3:41:28 PM

Caution: If you need to change the [Program] settings after the cycle has already started, turn the power off and on it back.