Safety & General Precautions
To prevent the risk of danger or material loss or damage to the user of others, make sure to follow the precautions described below.
WARNING
May cause a serious injury or death.
CAUTION
May cause physical injury or damage other items.
WARNING
Never disassemble, repair or remodel this washing machine.
If you disassemble, repair or remodel the washing machine by yourself, it can cause fi re or irregular action that results in injury.
Consult your dealer for repair.
When you are cleaning your washing machine, do not apply water directly to any part of the washing machine.
It will cause short circuit and electric shock.
Do not place the washing machine on a damp place such as in a bathroom or exposed to the outside weather.
There is risk of the insulation deteriorating, electric shock and overheating, or breakdowns due to rust.
Do not place any burning object including burning candles or cigarettes, on top or near the washing machine. 
There is a danger of fi re or set deformation.
Never touch the laundry with your hand during spin until the tub has completely stopped spinning.
If you touch the laundry, even if the tub is rotating slowly, there is a danger of injury if the laundry becomes entangled with your hand. Pay particular attention to protecting children from such injury.
Do not use power plug socket or wiring equipment more than their rated capacity.
When you use the socket or wiring more than its rated capacity by connecting multiple appliances, it can cause fi re due to overheating.
Please do not wash or spin laundry which stained with gasoline, kerosene, benzine, paint thinner or the likes of it.
There is a risk of explosion or fi re burn.
Never disconnect the power plug by pulling the power cord. Hold the power plug as you pull it out.
There is a danger of an electric shock or short circuit which may cause a fi re.
Make sure that the ground is attached to the power supply outlet.
Otherwise, there is a danger of electric shock at the time of machine trouble or electricity has leaked.
• Be sure to ask your dealer about grounding work.
Make sure to push the power plug completely into the power supply outlet.
If the power plug is not completely pushed into the outlet, this may cause electric shock and fi re due to overheating.
•Never use a damaged power cord.
3
11/23/11 3:41:12 PM
