Panasonic NA-F90H2 Choosing Your Own Laundry Setting, Maintenance, Wash, Rinse, Spin

Choosing Your Own Laundry Setting

You can select Program to wash your own laundry according to your preferences.

7	Wash	To reuse the wash water.
		• After washing, the wash water is left in the tub and the machine stop operation.
		• Select the time for washing as desired.
		• The time selection is depend on the Program chosen.
7	Rinse	To rinse the separately washed laundry.
		• After rinsing, the rinse water is left in the tub and the machine stop operation.
		• Select the time for rinsing as desired.
		• When choosing “Refill”, the water will fill in (overflow) during rinsing operation.
		• The time selection is depend on the Program chosen.
7	Spin	To spin the separately washed laundry.
		• If the water is left in the tub, it will drain before spinning.
		• If the lid is opened, it will only drain without spin.
		• Select the time for spinning as desired.
		• The time selection is depend on the Program chosen.
7	Wash	To reuse the rinse water.
7	Rinse	• After washing and rinsing, the rinse water is left in the tub and the machine stop operation.
		• Select the time for the process as desired.
		• The time selection is depend on the Program chosen.
7	Wash	To wash with water (without detergent).
7	Spin	• The machine will spin automatically without rinsing after washing.
		• Select the time for the process as desired.
		• The time selection is depend on the Program chosen.

7Rinse

7Spin • If the water is left in the tub, it will drain and followed by the intermediate spin before start of rinsing.

•Select the time for the process as desired.

•The time selection is depend on the Program chosen.

•In the case, when [Spin] or [Rinse] [Spin] is selected, if there is water in the tub, the machine will start from draining and if there is no water in the tub, it will start from spinning. So it will take a little while before the machine start operating.

•IN THE CASE WHEN [Child Lock] MODE IS SET.

In some cases, if the lid is opened when the tub contains water, the machine will start force draining. In this case, cancel the [Child Lock] mode.To rinse and spin the laundry Soaked with detergent.

Maintenance

To prevent fungus growth at the washing and spinning tub.

“Tub Hygiene” Course

				1
					3
			2
1	Press the [Power On] button.
2	Press the [Program] button 6 times for	• The [Tub Hygiene] light will be indicated.
	“Tub Hygiene” Course.
3
	Press the [Start/Pause] button.
4	When filled up with water, press the [Start/Pause] button, and pour about a cup of
	chlorine system bleach for clothing use directly into the washing and spinning tub.
	(Approx. 200ml per 50L of water.)
5	Close the lid, and press the	w Do not operate while clothing is in the washing tub.
	[Start/Pause] button.	w Cancel the “Child Lock” when it is active. Refer to
		page 16.

Operation will be finished in 2 and a half hours.

This is the course to prevent fungus growth at the washing and spinning tub using the “Chlorine system bleach for clothing use”, available in most markets, to keep the tub clean.

wDo not use the oxygen system bleach or chlorine

system bleach for kitchen use. (Too much lather may overflow.)

•Frequency for care : Once a month

•Operation will be continued for 2 and a half hours.

[NOTE]

•Fungus growth at the washing and spinning tub varies depending on ambient conditions.

17

NA-F90H2_EN_AR-PE-V2.indd 17

11/23/11 3:41:37 PM