How to Operate
H. CYCLE COUNTER
4O DISPLAY ALL COOKING TIMES EVEROUSED
1
2
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
| Open the door and leave it open. |
|
| The oven lamp will turn on and “0” will appear. |
|
| While pressing Start pad, press Number/Memory pad “3”. | e.g. |
All the cooking times that were ever used appear.
4O DISPLAY THE CUMULATIVEHNUMBER OFMTIMESATHEIOVEN WAS USED
1
2
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW | ||||
|
|
|
|
| Open the door and leave it open. |
|
|
|
|
|
| The oven lamp will turn on and “0” will appear. |
|
|
|
|
|
| While pressing Start pad, press Power Level Selector pad. | e.g. |
|
|
|
|
| The number of cycles that the oven has been used will appear. | |
|
|
|
|
|
| |
|
|
|
|
| Note: The last two digits are dropped from the cumulative number of |
|
|
|
|
|
| times the oven was used, which is displayed in units of 100 when |
|
|
|
|
|
| used over 100 times. |
|
|
|
|
|
|
|
|
I. AIR FILTER CLEANING
Example: To program cleaning Air Filter every 600 hours
1
2
3
4
PAD | INSTRUCTION | DIGITAL DISPLAY WINDOW |
| Open the door and leave it open. |
|
| The oven lamp will turn on and “0” will appear. |
|
| While pressing Start pad, press Number/Memory pad “7”. | e.g. |
The currently programmed hour will appear.
Press Number/Memory pads “6”, “0” and “0”. | e.g. |
The programmed hour will appear. |
|
Note: up to 9999 hours |
|
Press Prog pad. | e.g. |
“PROG” will stop blinking, and the set hours will appear for 3 seconds. |
|
Then “0” will appear. |
|
Note: When “FILt” sign appears in Digital Display Window, remove Air Filter and clean it with soapy water. Press Stop/Reset pad for 2 seconds to clear the display.
How to release the “FILt” sign
1.Press and hold down the Stop/Reset pad for 2 seconds.
2.The “FILt” sign is released and the buzzer sounds.
*If the Stop/Reset pad is not held down long enough, the “FILt” sign will disappear once but will reappear again after the screen goes blank.
- 18 -
