Shutdown & Cleaning - After Hopper Method Applications
15.To preserve paint in hose:
a.Point gun into paint pail.
b.Unlock gun trigger lock.
c.Pull and hold gun trig-
ger. | ti8922a |
d.Turn AllControl to
PRIME/CLEAN GUN AND HOSE.
ti9171a
e. Continue to hold gun trigger until you see |
paint, diluted with water starting to come |
out of gun. |
16. While continuing to |
trigger gun, quickly |
move gun to redirect |
19.Close Power Flush attachment.
CLOSED
TIA
20.Remove hose extender and Power Flush attachment from hopper.
ti9747a
21.Follow Long Term Storage instructions, page 29.
22.Clip drain tube to hopper.
23.Use a soft brush to clean paint and debris off strainer and install strainer in hopper.
spray into waste pail. |
Continue triggering |
gun into waste pail until |
water coming out of | ti9745a |
gun is relatively clear, approximately
17.Stop triggering gun. Engage trigger lock.
ti8923a
24.Clean gun fluid filter (d) with water or flushing solvent and a brush every time you flush the system. Replace gun filter if damaged.
25.Clean tip and guard with water or flushing solvent. A soft brush can be used to loosen and remove dried on material if needed.
d
ti9671a
ti9257a
18. Set AllControl™ to OFF.
ti9168a
26.Wipe paint off outside of
gun using a soft cloth moistened with water or flushing solvent.
27.Use a soft cloth to wipe off hopper, cover, and hose. Install hopper cover.
ti9126a
312079A | 23 |
