13.To preserve paint in hose:
a.Add enough water or cleaning solvent to refill hopper. Point gun into paint pail.
ti8922a
b. Unlock gun trigger lock. c. Pull and hold gun trigger.
d. Turn AllControl to
PRIME/CLEAN GUN & HOSE.
ti9171a
Continue to hold gun trigger until you see paint diluted with flushing fluid starting to come out of gun.
14. While continuing to
trigger gun, quickly move |
| |
gun to redirect spray into |
| |
waste pail. Continue |
| |
triggering gun into waste |
| |
pail until flushing fluid |
| |
dispensed from gun is | ti9745a | |
relatively clear and all the | ||
| ||
flushing fluid has drained |
| |
from hopper. |
|
15.Stop triggering gun. Engage trigger lock.
ti8923a
16. Turn AllControl to OFF.
ti9168a
Shutdown & Cleaning - After Hopper Method Applications
17.Follow Long Term Storage instructions, page 29.
18.Clip drain tube to hopper.
19.Use a soft brush to clean paint and debris off strainer. Install strainer in hopper.
20.Clean gun fluid fil- ter (d) with water or flushing solvent and a brush every
time you flush the |
|
system. Replace |
|
gun filter if dam- | d |
aged. | ti9257a |
21.Clean tip and guard with water or flushing solvent. A soft brush can be used to loosen and remove dried on material if needed.
ti9671a
22.Use a soft cloth to wipe off hopper, cover, and hose. Install hopper cover.
ti9226a
CAUTION
Do not immerse hopper. Water or cleaning solvents will damage the internal sprayer components.
312079A | 21 |