Power Flush
Power flushing is a faster method of flushing. It can only be used after spraying
1.Relieve pressure, page 7.
2.If you used a spray gun, remove tip and guard assembly from gun and place in flushing fluid.
If you used a roller, leave roller assembly attached to gun.
3.Pour unused paint out of hopper and back into original container.
ti9292a
4.Place drain tube in waste pail.
ti9376a
5.Use inlet screen handle to remove inlet screen from hopper. Place in bucket of clean water or cleaning solvent.
ti9378a
6.Turn AllControl to PRIME/CLEAN PUMP to remove excess paint in hopper.
ti9168a
7.If you used a liner, carefully remove liner from hopper and dispose of liner in a proper trash container.
Shutdown & Cleaning - After Hopper Method Applications
8.Screw power flush attachment to garden hose.
ti9761a
9. | Thread hose extender into |
|
|
| hopper inlet. |
|
|
|
| ti9762a | |
10. Connect Power Flush |
|
| |
| attachment to hose extender. |
|
|
|
| ti9743a | |
11. Turn water on and open |
|
| |
| valve. |
|
|
|
| ti9744a | |
12. | Turn AllControl to |
|
|
| PRIME/CLEAN PUMP. Let |
|
|
| water flow out of drain tube, |
|
|
| into waste pail for 30 |
|
|
| seconds. | ti9169a |
|
|
| ||
13. | Turn AllControl to OFF. |
|
|
14. |
|
|
|
| a. If you used a spray gun |
|
|
| only, continue with Step | ti9168a | |
| 14. |
|
|
b. If you used a roller follow Cleaning Roller instructions beginning on page 28.
Step 15 is for returning paint in hose back to 
paint pail. One
22 | 312079A |
