Getting Started
AllControl™ Settings
|
| OFF - turns motor off for short | |
STORAGE - long term and |
| term shutdown and relieves | |
| system pressure | ||
overnight shutdown and storage |
| ||
|
|
| |
|
|
|
|
PRIME/CLEAN PUMP - turns motor on and directs fluid to
prime tube HI SPRAY - uses high pressure
to direct fluid to spray gun
ROLL - directs low pressure
fluid to roller (when used)
SETTING INDICATOR - selects function
|
| PRIME/CLEAN GUN & HOSE - |
LOW SPRAY - uses low pressure |
| |
| directs fluid to gun and hose | |
to direct fluid to spray gun |
| |
|
| |
|
|
|
|
|
|
Setup
Project Painter 5 can be used as either a hopper or direct immersion sprayer.
Hopper Method (Primary Spray Method)
3.Set AllControl to OFF. Engage gun trigger lock.
ti9168a
1.Stand sprayer upright to verify the suction tube is securely and properly connected to fitting (a) and hopper elbow (b). If they are not, connect suction tube and tighten securely.
a 
b
ti9294a
4.Unscrew tip and guard assembly from gun.
ti9204a
5. Uncoil hose and connect |
one end to gun. Use two |
2. Return sprayer to horizontal position.
wrenches to tighten |
securely. |
ti9203a
8 | 312079A |
